求翻译：把FBK用接近开关装到编码器安装支架左侧最里面的一个安装孔上，注意正反方向。两边先不要锁紧螺母，然后把轴上的圆环上的螺钉松开，把螺钉调整到对准接近开关的位置，然后锁紧螺钉。然后调节接近开关至螺钉头2mm处，把接近开关锁紧。是什么意思？

With fbk proximity switch mounted to the encoder installation bracket left side of the innermost mounting holes, pay attention to the positive and negative direction. Both sides do not lock nut first, then the axis of the rings on the screws loosen the adjustment screw to align close to the switch,

With the FBK close to switch to the encoder installed inside the left side of the bracket mounting holes on a attention, both positive and negative direction. Both sides do not lock nut on the shaft, and then to the screws on the circle, and adjust the screws to align to the position of the switch,

Installs FBK with the close switch to the encoder installs left side of the support on a most inside installment hole, attention pro and con direction.Nearby two do not have to lock the nut first, then loosens on the axis on ring bolt, screw adjustment alignment close switch position, then gib screw

Encoder FBK proximity switch mounted to left side of the mounting bracket on the innermost one mounting hole, attention to the positive and negative directions. Don't lock nuts on both sides, and then put the ring on the shaft of the screw loosened, proximity switch position adjusting screws to alig

正在翻译，请等待...