|
关注：1
2013-05-23 12:21
求翻译：把主轴编码器线W10108穿过机身后侧金属走线槽及机脚方孔，然后接至编码器组件中的圆形编码器上，拧紧编码器插头。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
把主轴编码器线W10108穿过机身后侧金属走线槽及机脚方孔，然后接至编码器组件中的圆形编码器上，拧紧编码器插头。
问题补充： |
|
2013-05-23 12:21:38
Spindle encoder line through the rear metal body to go trough the machine foot square hole, and then connected to a circular encoder component encoder w10108, tighten the encoder plug.
|
|
2013-05-23 12:23:18
The main encoder lines through the bodywork W after 10,108 metal side go machine online slot and pin square hole, and then to the encoder in the Component round on the encoder Encoder plug, and tighten.
|
|
2013-05-23 12:24:58
正在翻译，请等待...
|
|
2013-05-23 12:26:38
Encoder cables W10108 spindle through the fuselage side metal Cabling Channel and machine foot square hole, and then to round on the encoder in encoder component, tighten the encoder plug.
|
|
2013-05-23 12:28:18
Walks the trunking the main axle encoder line W10108 traversing fuselage rear end metal and the undercarriage square edged orifice, then meets to the encoder module in on the circular encoder, screws tight the encoder plug.
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
