求翻译：在Prüfbau印刷适性仪的第二个印刷单元中，试验油墨于被控条件下被均匀的涂抹在纸样上；纸样干燥后，使用75°角测量印刷光泽度。通过使用每次印刷后不上墨的方法让印版滚筒上的油墨逐渐减少，达到提供不同油墨密度的功能。高光泽度测量值意味着高印刷光泽度，并且通常意味着高的印刷质量[22]。是什么意思？

正在翻译，请等待...

In Pru fbau Printing is one of the printing of the first 2 in the unit test inks, and in the control condition of the coat is uniformly in the same way as on paper; after drying, use a 75 ° angle measurement printed gloss. Each time through the use after the printing is not the way to make the ink p

In Prüfbau in the printability meter second printing unit, the experimental printing ink even is spread under the accusation condition wipes on the paper type; After paper type dry, the use 75° angular measurement quantity prints glossiness.Each time prints the inking method after the use not to let

Pr • fbau in the second printing for printability tester, test inks to be under controlled conditions be evenly applied on the pattern; pattern after drying, use a 75 ° angle measuring ink gloss. By using the method of printing without ink at a time was gradually reduced by ink on the printing plate