|
关注：1
2013-05-23 12:21
求翻译：栓钉连接件钉头下表面或槽钢连接件上翼缘下表面高出翼缘底部钢筋顶面不宜小于30mm.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
栓钉连接件钉头下表面或槽钢连接件上翼缘下表面高出翼缘底部钢筋顶面不宜小于30mm.
问题补充： |
|
2013-05-23 12:21:38
Stud connection reinforced top surface of not less than 30mm above the surface of the flange at the bottom of the flange on the pieces of nail head under the surface or channel connections.
|
|
2013-05-23 12:23:18
Latch pins connector pins and the steel surface or socket connections on the wing trailing edge wing trailing edge surface bottom-top steel less than 30 mm is not.
|
|
2013-05-23 12:24:58
The feather piece bridge piece nail head undersurface or the channel steel bridge piece top flange undersurface outdoes the flange base steel bar top to be smaller than not suitably 30mm.
|
|
2013-05-23 12:26:38
Under the nail head Stud connector on the surface or channel connection flange surface above the bottom flange steel bar under the top surface should not be less than 30mm.
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
