求翻译：柱间支撑与柱在翼缘板相连接时，需在支撑中心线与翼缘板相交处设加劲肋，当左右两侧同时有支撑时，两支撑与柱交点高差小于200mm时，仅在高位设一个加劲板，否则应在各自交点处设加劲板是什么意思？

Column and brace and the column flange plate connected, need to support the centerline of the flange plate intersection of set the stiffener, when the left and right sides at the same time support the two support column intersection of the height difference is less than 200mm, only set up a stiffene

Post-column support and the wing leading edge panels that are connected to the Support Center and wing leading edge panels located at the intersection when the hit prime rib, both the left and right side, with a support column intersection with two support is less than 200 mm high, only one in the u

Between the column the support and the column connects when the flange plate, must in the support middle line and the flange plate intersect point supposes the stiffening rib, when about the both sides simultaneously have the support, when two supports and the column point of intersection elevation

Between columns supporting you to connect with column flange plate, need to support center line at the intersection with flange plate stiffener established, supported at one time when the left and right sides, two supporting intersections and column height difference is less than 200mm, a stiffened

正在翻译，请等待...