当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:每层焊缝厚度一般为焊条直径的0.8~1.2倍,各层引弧点和熄弧点均应错开。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
每层焊缝厚度一般为焊条直径的0.8~1.2倍,各层引弧点和熄弧点均应错开。
问题补充:

  • 匿名
2013-05-23 12:21:38
Weld thickness of each electrode diameter of 0.8 to 1.2 times the levels of point and arc extinction point should be staggered.
  • 匿名
2013-05-23 12:23:18
Each layer thickness normally welds for welding rod diameter of 0.8 ~1.2 times cited arc points at various levels shall be staggered arc points and 9.16 am.
  • 匿名
2013-05-23 12:24:58
Each welded joint thickness generally for welding rod diameter 0.8~1.2 time, each level directs the arc and the blow-out should stagger.
  • 匿名
2013-05-23 12:26:38
Every weld thickness is 0.8~1.2 times the electrode diameter, ARC ARC the points and out points of each layer should be staggered.
  • 匿名
2013-05-23 12:28:18
Weld thickness of each electrode diameter of 0.8 to 1.2 times the levels of point and arc extinction point should be staggered.
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭