decarburization怎么读，decarburization什么意思，decarburization短语和例句

1.The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.

结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。

2.The effect of various process factors on decarburization process in VD was studied by the model and the optimizing decarburization process in VD can be obtained.

用该模型模拟研究了各工艺因素对VD精炼脱碳过程的影响。 模拟结果可为VD精炼脱碳工艺的制定和优化提供指导依据。

3.The decarburization rate in bath is proportional to the intensity of oxygen supply and the utilization ratio of oxygen depends on the oxygen pressure.

在高碳范围内熔池脱碳反应速度与供氧强度和氧气利用率成正比。而提高吹氧压力可以提高氧气利用率。

4.The paper analyze the principle of steel circulation of flow, decarburization, degas and all of the factors affected in RH refining.

对RH精炼工艺的钢液循环流动、脱碳、脱气的原理以及影响因素进行了分析。

5.The primary reason for lowering the fatigUe life is decarburization.

指出， 氧化脱碳引起疲劳寿命降低是该扭轴失效的主要原因。

6.The effect of rare-earth elements to prevent oxidation and decarburization in heat treating salt bathshas been discussed.

本文就稀土对盐浴防氧化脱碳的作用进行了研究。

7.The effects of various factors on decarburization of high speed tool steel annealed in bogie hearth electric furnace were investigated in this paper.

研究了高速钢轧材在台车式电阻炉中退火加热过程中，各因素对脱碳的影响。

8.E. g. There is tight (or thin and highly adherent) scale and decarburization, at least in certain areas.

部件上有密布(稀疏但附着力很强)鳞片和脱碳痕迹，至少在部分区域如此。

9.Is hardness tested on a surface that has been ground to remove decarburization?

硬度检测是否在去除了氧化皮的表面上进行？