|
关注：1
2013-05-23 12:21
求翻译：需要蚀纹的外观面是否为装配好后的外露面，MT11020纹号要求脱模斜度大于3度，请处理小于3度的面是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
需要蚀纹的外观面是否为装配好后的外露面，MT11020纹号要求脱模斜度大于3度，请处理小于3度的面
问题补充： |
|
2013-05-23 12:21:38
Require the appearance of the etch surface is assembled outside appearances Demoulding mt11020 pattern requires more than 3 degrees, deal with the surface of less than 3 degrees
|
|
2013-05-23 12:23:18
Need to be corrosion of the Appearance panel is assembled the outer appearance, after 11,020 MT tattoo to stripper slope greater than 3 degrees, with less than 3 degrees of the surface
|
|
2013-05-23 12:24:58
Needs to eclipse the grain the outward appearance surface whether for assembles after outside to make an appearance, the MT11020 grain number request drawing of patterns ascent is bigger than 3 degrees, please process is smaller than 3 degrees surface
|
|
2013-05-23 12:26:38
Need to etch the exposed surface of the skin surface is assembled, MT11020 grain, requiring release angle greater than 3 degrees, handle in front of less than 3 degrees
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
