求翻译：测量系统采用LabVIEW来编写采集程序，在MAX中通过DAQ助手配置数据采集程序，为了使采样后输出的离散时间序列信号能无失真地复原原输入信号，采样信号不发生畸变，遵循采样定理，测量系统设置两个通道的采样频率均为10KHz，采样点数均为10000。是什么意思？

Measurement system using labview to write the collection process, the max daq assistant to configure data collection procedures, in order to make the sample after the output of the discrete-time sequence signal without distortion to recover the original input signal, sampling the signal is not disto

Measurement Systems used to prepare LabVIEW acquisition application, through the MAX DAQ Assistant configuration data collection procedures, in order to allow the sample the output of discrete time series signals without distortion to recover the original input signal, the sampling signal is not dis

The measurement system uses LabVIEW to compile the gathering procedure, disposes the data acquisition procedure in MAX through the DAQ assistant, after in order to enable the discrete time sequence signal which the sampling outputs not to have the distortion to recover the original input signal, the

Measurement systems using LabVIEW to write acquisition program, through the DAQ Assistant to configure data acquisition program in the MAX, in order to enable after sampling the output sequence of discrete-time signal to recover the original input signal without distortion, sampled signal distortion

信号条件