|
关注:1
2013-05-23 12:21
求翻译:在下料前检查钢板的牌号,厚度和表面质量,表面有蚀点深度≥0.2mm的缺陷不可使用是什么意思? 待解决
悬赏分:1
- 离问题结束还有
在下料前检查钢板的牌号,厚度和表面质量,表面有蚀点深度≥0.2mm的缺陷不可使用
问题补充: |
|
2013-05-23 12:21:38
Before the next expected grades, thickness and surface quality inspection for steel surface corrosion point depth ≥ 0.2mm defects can not be used
|
|
2013-05-23 12:23:18
Before the next check the steel grade, thickness, and surface quality, and surface erosion is ≥ 0.2 mm depth of defects do not use
|
|
2013-05-23 12:24:58
Inspects the steel plate in front of the yummy treats the trademark, thickness and the surface quality, the surface has the eclipse depth ≥0.2mm flaw not to be possible to use
|
|
2013-05-23 12:26:38
In the grade of material under inspection plate, thickness and surface quality, defect surface corrosion depth ≥ 0.2mm unavailable
|
|
2013-05-23 12:28:18
down the front of the steel grade, thickness, and surface quality, and surface erosion is ≥ 0.2 mm depth of the defect should not be used;
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区