当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:- You should place big and thick GND and Vcc lines, but on you board signal lines and power lines have the same thickness about 8mils. (All power current, up to 100mA with decoupling on freq. up to 10MHz flows on 8mils lines! These lines have big inductance on High Frequences.)是什么意思?

待解决 悬赏分:1 - 离问题结束还有
- You should place big and thick GND and Vcc lines, but on you board signal lines and power lines have the same thickness about 8mils. (All power current, up to 100mA with decoupling on freq. up to 10MHz flows on 8mils lines! These lines have big inductance on High Frequences.)
问题补充:

  • 匿名
2013-05-23 12:21:38
- 你应该把大而厚的GND和VCC线,但你板信号线和电源线有大约8mils的厚度相同。 (所有电源电流高达100mA的频率上脱钩。到10MHz 8mils线流动,这些线路有大高frequences的电感。)
  • 匿名
2013-05-23 12:23:18
-您应该将大和厚gnd和vcc线路,但在您主板信号线和电源线都是同一厚度约8密耳。 (所有电源电流,可达100ma,去耦的频率高达10mhz的流动8密耳线! 这些线路都有大电感高frequences。)
  • 匿名
2013-05-23 12:24:58
  • 匿名
2013-05-23 12:26:38
  • 匿名
2013-05-23 12:28:18
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭