求翻译：经过求解和后处理得到齿轮的σx应力(横向弯曲应力)分布图如图6所示，可以看到齿根受拉侧的最大拉应力为107MPa、受压侧的最大压应力为124 MPa。是什么意思？

After solving and post-processing to get the gear σx stress (lateral bending stress) distribution shown in Figure 6, you can see the tension side of the tooth root maximum stress of 107MPa, pressure side of the maximum compressive stress of 124 MPa.

After this and post-processing of the gears to X stress (horizontal bending stress) map of the distribution, as illustrated in figure 6 can be seen by the side of the tooth root, stress is one of the largest 107 MPa side, under pressure of the greatest pressure for 124 MPa stress.

Obtain the gear after the solution and the post-processing σx the stress (crosswise bending stress) distribution map as shown in Figure 6, may see the tooth root is pulled the side the most Dollar stress is 107MPa, the bearing side biggest compressed stress is 124 MPa.

正在翻译，请等待...

After solving and post-processing to get the gear σx stress (lateral bending stress) distribution shown in Figure 6, you can see the tension side of the tooth root maximum stress of 107MPa, pressure side of the maximum compressive stress of 124 MPa.