求翻译：使用时，先将出油阀装入夹具，然后将管接头1与喷油嘴试验器上的油管接通，借助喷油嘴试验器建立油压即可。根据我们的使用维修经验，要求：是什么意思？

Use, the first out of the valve into a jig, then the tube connector on the tubing in the fuel injector tester connected with the fuel injector tester to establish the oil pressure can be. According to our experience in repair and maintenance requirements:

When used, will be the first oil valve into the clamp, and then will be fitting with 1 injector tester on the line on the injector test, with a pressure. Based on our experience, the use of the Service Request:

When use, loads first the delivery valve the jig, then pipe connection 1 and on nozzle tester drill tubing connection, with the aid of nozzle tester establishment flowing tubing head pressure then.According to ours use service experience, request:

When using the outlet valve into the fixture and fitting up the tubing on the nozzle test 1 and, nozzle tester with the establishment of oil pressure. According to our repair experience, requirements:

正在翻译，请等待...