|
关注：1
2013-05-23 12:21
求翻译：喷粉均匀，不能少粉，积粉，杂质，可接受0。2mm以下颗粒及凹点，表面不能刮伤，碰伤等。喷粉厚度为70-120μm是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
喷粉均匀，不能少粉，积粉，杂质，可接受0。2mm以下颗粒及凹点，表面不能刮伤，碰伤等。喷粉厚度为70-120μm
问题补充： |
|
2013-05-23 12:21:38
Spray evenly, and no less powder, powder product, impurities, acceptable 0. 2mm these particles and pits, the surface is not scratched, bruised and so on. Powder thickness of 70-120μm
|
|
2013-05-23 12:23:18
evenly, dusting powder, MPF contributions should not be less powder, impurity, acceptable 0. 2mm below surface, particles and AU point cannot be scratching, bruising, and so on. dusting thickness of 70 - 120 µm
|
|
2013-05-23 12:24:58
The dusting is even, cannot the few powder, accumulate the powder, the impurity, may accept 0.The 2mm following pellet and the concave spot, the surface cannot the abrasion, bump into and injure and so on.Dusting thickness is 70-120 μm
|
|
2013-05-23 12:26:38
Dusting even, less powder, accumulated powder, impurity, 0 is acceptable. 2mm particles and pits, not scratches on the surface, scratches, and so on. Powder injection in 70-120 thick μ m
|
|
2013-05-23 12:28:18
Spray evenly, and no less powder, powder product, impurities, acceptable 0. 2mm these particles and pits, the surface is not scratched, bruised and so on. Powder thickness of 70-120μm
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
