求翻译：PC6为低电平，Q2截止，R27与Q2在电气特性上为断开，R26和R27之间的电压VG=12V， VGS=0V,MOS管截止，漏极电压为0，ADR441的输入为0，传感器停止工作。当PC6高电平的时候，Q2导通，R27接Q2的那一端相当于接地， R26和R27之间的电压VG=1.09V，VGS=-10.91V，VGS是什么意思？

pc6 low q2, closing, r27 and q2 on the electrical characteristics for the disconnect, r26 and r27 between the voltage of the vg = 12v, the vgs = 0v mos tube cut-off, the drain voltage is 0, adr441 input 0 , the sensor stopped working. End pc6 high q2, conduction, r27 then q2 is equivalent to the vol

PC 6 is low, Q R 27 2 and the deadline to 2 Q on the electrical characteristics of the Disconnect, R R 27 26 AND the voltage between V VG = 12 = 0, VGS V MOS pipe, drain voltage and the deadline is 0, 441 ADR the input is 0, the sensor stopped working. When PC 6 high level, Q 2 Pass, 2 R Q 27 to the

PC6 is the low level, the Q2 closure, R27 and Q2 for separates in the electrical specification, between R26 and R27 voltage VG=12V, the VGS=0V, MOS tube closure, leak the pole tension is the 0, ADR441 input is 0, sensor knock off.When PC6 high level time, the Q2 breakover, R27 meets Q2 that one to l

PC6 is low-level, Q2 due, R27 and Q2 on the electrical characteristics of open, R26, R27 voltage VG=12V,VGS=0V,MOS between pipe stop, drain voltage as input to 0,ADR441 is 0, the sensor stops working. PC6 terminated when Q2 breakover, R27 Q2 of the end equivalent to grounding, R26, R27 voltages betw

正在翻译，请等待...