|
关注：1
2013-05-23 12:21
求翻译：图片中红色部分的元件是FPGA的E16管脚，E16是FPGA的复位输入端口，因为是复位信号是低电平有效，所以E16需要连接到3.3V电源供电是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
图片中红色部分的元件是FPGA的E16管脚，E16是FPGA的复位输入端口，因为是复位信号是低电平有效，所以E16需要连接到3.3V电源供电
问题补充： |
|
2013-05-23 12:21:38
Components of the red part of the picture fpga e16 pin e16 fpga reset input port, the reset signal is active low, so e16 need to be connected to the 3.3v power supply
|
|
2013-05-23 12:23:18
Red in the picture is part of the element of FPGA E E 16 pins, 16 is the reset input FPGA port, because it is reset signal is low, so you will need to be connected to 16 E V 3.3 power supply
|
|
2013-05-23 12:24:58
In the picture the red part part is the FPGA E16 base pin, E16 is the FPGA replacement input port, because is repositions the signal is the low level is effective, therefore E16 needs to connect the 3.3V power source power supply
|
|
2013-05-23 12:26:38
Pictures in the red part of the component is E16 pins of the FPGA, E16 is the reset input port of the FPGA, reset signal is low because it is effective, E16 needs to connect to the 3.3V power supply
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
