求翻译：本文制备了一种汽车钢化玻璃油墨，通过对油墨进行了热分析,然后对不同烧结温度和不同烧结时间的油墨进行了SEM和XRD分析以及测试了油墨层的性能,确定了最佳的烧结温度和烧结时间为660 oC和4 min;同时探讨了汽车钢化玻璃油墨的烧结机理:油墨中的低熔点玻璃粉在树脂分解后软化熔融代替树脂作为连结料,随着温度的提高、时间的延长,最终流平铺展形成致密的油墨层,油墨耐酸性较好,同时温度超过低熔点玻璃粉的析晶温度580 oC,油墨向表层析出NaAlSiO4 、FeF3 、NaBF4晶体,使得具有抗粘性,也提高了耐酸性.是什么意思？

This article was prepared by an automotive tempered glass ink, ink, thermal analysis, and then the ink of different sintering temperature and sintering time sem and xrd analysis, and test the performance of the ink layer to determine the optimum sintering temperature and sintering time of 660 oc and

This article has also produced a range of automotive steel, glass, ink through the ink in the thermal analysis, and then the different sintering temperature sintering time and different inks and XRD SEM the analysis, as well as test the ink level of performance and identify the best of the sintering

This article has prepared one kind of automobile armored glass printing ink, through has carried on the thermal analysis to the printing ink, then has carried on SEM and XRD to the different agglutination temperature and the different agglutination time printing ink analyzes as well as has tested th

This preparation has a car tempered glass ink, by on ink for has hot analysis, and on different sintering temperature and different sintering time of ink for has SEM and XRD analysis and test has ink layer of performance, determines has best of sintering temperature and sintering time for 660 oC and

正在翻译，请等待...