|
关注：1
2013-05-23 12:21
求翻译：Fault phenomena D could be caused by the following reasons: (1) shut off valve is locked in closed position; (2) valve jamming in the closed position; (3) air supply pressure is not enough. Shutoff valve locked in the closed position, can be manually unlock. Caused by the valve jamming of the main reasons are: wear of 是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Fault phenomena D could be caused by the following reasons: (1) shut off valve is locked in closed position; (2) valve jamming in the closed position; (3) air supply pressure is not enough. Shutoff valve locked in the closed position, can be manually unlock. Caused by the valve jamming of the main reasons are: wear of
问题补充： |
|
2013-05-23 12:21:38
D可以由以下原因造成的故障现象：（1）关闭阀门锁定在关闭位置;（2）阀门在关闭位置干扰;（3）供气压力是不够的。截止阀锁定在关闭位置，可以手动解锁。阀干扰造成的主要原因是：穿阀传动轴，轴端松自锁螺母，弹簧断裂，位置指示器开关损坏。供气压力是不够的防冰阀门管接头，燃气泄漏，外部控制阀管气体泄漏，先进的阀门故障或先进的阀门锁定在关闭位置，阀门控制器出现故障，可以通过管道测试排除泄漏引气系统的运行测试和压力检查。
|
|
2013-05-23 12:23:18
故障现象d可能是由以下原因引起:(1)截止阀已被锁定在关闭位置;(2)阀卡在关闭位置;(3)供气压力是不够的。 关断阀锁定在关闭位置时,可以手动解除锁定。 造成的干扰的阀的主要理由是:磨损的阀门驱动轴,轴端松动自锁螺母,春假,位置指示开关是否损坏。
|
|
2013-05-23 12:24:58
缺点现象D能由以下原
|
|
2013-05-23 12:26:38
正在翻译，请等待...
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
