|
关注：1
2013-05-23 12:21
求翻译：按零件图要求钻出4-M12的底孔与∅25，深20mm的圆孔;直径偏差±0.6mm，是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
按零件图要求钻出4-M12的底孔与∅25，深20mm的圆孔;直径偏差±0.6mm，
问题补充： |
|
2013-05-23 12:21:38
Drilled a 4-m12 bottom outlet with ∅ 25, part drawing deep the hole 20mm; diameter deviation of ± 0.6mm.
|
|
2013-05-23 12:23:18
The requirements in part 4 - M drilled out 12 OF THE 25 holes and ∅, 20 mm; diameter hole deviation of ±0.6 mm,
|
|
2013-05-23 12:24:58
Drills 4-M12 according to the detail drawing request the bottom hole and ∅25, deep 20mm round hole; Diameter deviation ±0.6mm,
|
|
2013-05-23 12:26:38
According to the parts diagram requires drilling holes at the end of the 4-M12 and ∅ 25, deep round hole 20mm; diameter deviation ± 0.6mm,
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
