当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:在系统中增加回热器可以显著降低涡轮出口的温度,并使系统的制冷量增大。在压气机进口压力为200kpa的工况下,有回热器的涡轮的出口温度可以达到-45℃,系统的制冷量为6kw。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
在系统中增加回热器可以显著降低涡轮出口的温度,并使系统的制冷量增大。在压气机进口压力为200kpa的工况下,有回热器的涡轮的出口温度可以达到-45℃,系统的制冷量为6kw。
问题补充:

  • 匿名
2013-05-23 12:21:38
The recuperator increase in the system can significantly reduce the turbine outlet temperature and the cooling capacity of the system increases. 200kpa the conditions of the compressor inlet pressure, turbine recuperator outlet temperature can reach -45 ° C, the cooling capacity of the system 6kw.
  • 匿名
2013-05-23 12:23:18
In the system back to the server can significantly reduce the turbine outlet temperature and the system's cooling capacity increases. The air compressor inlet pressure is 200 KPA's performance, it is back to the server of the turbine is the outlet temperature can be reached, C - 45 ° of cooling syst
  • 匿名
2013-05-23 12:24:58
Increases the regenerator in the system to be possible obviously to reduce the temperature which the turbine wheel exports, and causes the system the refrigeration quantity to increase.In the air compressor inlet pressure is under the 200kpa operating mode, has the regenerator turbine wheel outlet t
  • 匿名
2013-05-23 12:26:38
Increased heat exchangers in the system can significantly reduce turbine outlet temperature, and increases the amount of cooling the system. At the compressor inlet pressure under 200kpa, regenerative turbine outlet temperature of up to-45 ° c, systems of refrigerating output of 6kW.
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭