当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:   断面模拟均按照《波浪模型试验规程》的要求进行制作。试验首先在无建筑物情况下对设计提供的不同水位与重现期的波浪要素进行率定,率定中波高及周期的偏差控制在+5%之内;然后按照断面图及相应的比尺在水槽中摆放模型进行试验,模型尺寸误差不大于±1.0mm,块体、块石重量偏差均严格控制在+3%之内。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
   断面模拟均按照《波浪模型试验规程》的要求进行制作。试验首先在无建筑物情况下对设计提供的不同水位与重现期的波浪要素进行率定,率定中波高及周期的偏差控制在+5%之内;然后按照断面图及相应的比尺在水槽中摆放模型进行试验,模型尺寸误差不大于±1.0mm,块体、块石重量偏差均严格控制在+3%之内。
问题补充:

  • 匿名
2013-05-23 12:21:38
Production cross section simulations were carried out in accordance with the requirements of the wave model testing procedures. Test first of all no buildings designed to provide different water levels and the return period of the wave elements fixed rate, the deviation of the calibrated wave height
  • 匿名
2013-05-23 12:23:18
正在翻译,请等待...
  • 匿名
2013-05-23 12:24:58
   The cross section simulation defers to "Wave Model experiment Regulations" the request carries on the manufacture.The experiment first to designs the different water level and the return period wave essential factor in the non-building situation which provides carries on the rating, in the rating
  • 匿名
2013-05-23 12:26:38
   Section simulation is conducted in accordance with the requirements of the specification for model experiment of wave production. Test first design without buildings provide different water levels and rates of return period wave, wave high rate of deviation control and cycle in +5%; and in accord
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭