当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:   负压自动放水器整体由钢板焊接而成,其中进水管两侧安装通气阀门,用定位架固定中心导杆,依靠浮力堵住进水口进而打开通气阀,水的自重打开放水阀实现放水。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
   负压自动放水器整体由钢板焊接而成,其中进水管两侧安装通气阀门,用定位架固定中心导杆,依靠浮力堵住进水口进而打开通气阀,水的自重打开放水阀实现放水。
问题补充:

  • 匿名
2013-05-23 12:21:38
Negative pressure drainage device as a whole by a steel plate welded on both sides of the inlet pipe to install ventilation valves, positioning cage center guide, relying on the buoyancy block the inlet and then open the vent valve, the weight of water to fight the open valve to achieve water .
  • 匿名
2013-05-23 12:23:18
Negative-pressure auto drain, overall the steel plate welded to the sides of the water inlet valve and install ventilation with the fixed center guides, and rely on buoyancy Plug inlet to open the bleeder valve, water purification open the drain valve to drain water.
  • 匿名
2013-05-23 12:24:58
The negative pressure automatic water discharge bilge whole becomes by the steel plate welding, in which water inlet pipe both sides installment ventilation valve, with the adjusting clamp fixed center guide rod, depends upon the buoyancy to stop up the water inlet then to turn on the breather valve
  • 匿名
2013-05-23 12:26:38
Negative pressure automatic water consists of steel plates welded together as a whole, both sides of the inlet pipe installed ventilation valves, with position fixed Center bar, relying on buoyancy is blocked and thus opened the valve of intake, the weight of water open discharge valve to achieve re
  • 匿名
2013-05-23 12:28:18
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭