当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:由于高炉煤气发热值Qlow约为3000~3200 kJ/m3,烧纯高炉煤气时很难得到1250℃的风温。如高炉煤气中混入5%~10%的焦炉煤气或转炉煤气以富化高炉煤气是最为简单和有效的方法.是什么意思?

待解决 悬赏分:1 - 离问题结束还有
由于高炉煤气发热值Qlow约为3000~3200 kJ/m3,烧纯高炉煤气时很难得到1250℃的风温。如高炉煤气中混入5%~10%的焦炉煤气或转炉煤气以富化高炉煤气是最为简单和有效的方法.
问题补充:

  • 匿名
2013-05-23 12:21:38
Blast furnace gas calorific value is about 3000 ~ 3200 kj m3 qlow burn pure blast furnace gas is difficult to 1250 ° C air temperature. Mixed with 5% ~ 10% of the coke oven gas or converter gas-rich blast furnace gas is the most simple and effective methods such as blast furnace gas.
  • 匿名
2013-05-23 12:23:18
The blast furnace gas heating value Qlow is approximately 3000 ~ 3200 kJ M3 and to burn pure blast furnace gas, it is difficult to get 1250 °C the wind temperature. If blast furnace gas mix in 5 per cent to 10 per cent of the coke oven gas or gas in the rich, aisc blast furnace gas is the most simpl
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
Due to the blast furnace gas heating value about 3000~3200 kJ m3 Qlow burning plain are hard to come by when the blast furnace gas temperature 1250 ° c wind. Blast furnace gas is mixed in with 5%~10% or converter gas in coke oven gas of blast furnace gas-rich is the most simple and effective way.
  • 匿名
2013-05-23 12:28:18
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭