求翻译：本设计中贮矿槽设置为单排，采用皮带机供料，贮矿槽宽度为10。高度为12 m。矿槽总长度决定于车间的长度，后者决定于高炉中心线的距离。单个矿槽长度（采用带式运输机）为5。是什么意思？

The design of storage Trough is set to single row, the use of belt conveyor feeding, storage Trough width of 10. Height of 12 m. The total length of the mine shafts is determined by the length of the workshop, the latter is determined by the distance of the blast furnace centerline. Length of a sing

In this design the mine set up as a single slot, and a belt-feed slot width, the mine is 10. Height is 12 m. Mine slot decided to total length of the workshop on length, the latter from center of furnace. A single mine slot length (with band-style cargo planes) is 5.

In this design the bunker establishes as the single line, uses the belt fastener to supply the material, the bunker width is 10.Is highly 12 m.The ore trough total length decided in the workshop length, the latter decides in the blast furnace middle line distance.The single ore trough length (uses b

Storage bin set this design as a single-row, with belt feeding, storage bin width is 10. Height of 12 m. Bin total length depends on the length of the workshop, which determines the distance to center line of blast furnace. A single bin length (belt-type conveyor) 5.