求翻译：最终优化后的浇注系统设计方案将流动前沿温差降低到6℃，剪切应力也降低了很多，整体填充均匀、流动平衡；优化后的冷却系统将冷去介质温度差降低到0.16℃，并将制品总变形量减小到0.5242mm。通过软件的模拟分析在模具加工之前得到优化的模具设计方案，以确保产品的外观和质量。是什么意思？

The final optimized gating system design flow front temperature difference down to 6 ° C, shear stress also reduces the overall fill uniformity, flow balance; optimized cooling system will be cold to go medium temperature difference reduced to 0.16 ℃, and products total deformation reduced to 0.5242

After optimizing the design of the gating system program will reduce the flow front temperature difference, 6° C shear stress is reduced by the many, filling evenly balanced, and flows; optimized cooling system will be cold to go to medium temperature difference between the lower 0.16 °C products, a

Finally will optimize after the casting system design plan to flow the front temperature difference to reduce 6℃, the shear stress also reduced very much, the whole fills evenly, the mobile equilibrium; After the optimized cooling system will be cold goes to the medium temperature difference to redu

Final frontier after optimization of gating system design flow temperature by up to 6 degrees centigrade, shear stress is reduced a lot, overall fill evenly, flow balance optimized cooling system cool down a media down to 0.16 ° c temperature difference, and reduces the total deformation of products

正在翻译，请等待...