当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:装置采用电流互感器取电技术及低功耗设计,当A、B、C三相电流中任何一相电流达到额定电流的10%,装置即能正常工作,并为断路器提供跳闸电源,从而大大简化了高压开关柜二次回路的设计是什么意思?

待解决 悬赏分:1 - 离问题结束还有
装置采用电流互感器取电技术及低功耗设计,当A、B、C三相电流中任何一相电流达到额定电流的10%,装置即能正常工作,并为断路器提供跳闸电源,从而大大简化了高压开关柜二次回路的设计
问题补充:

  • 匿名
2013-05-23 12:21:38
The device uses a current transformer to take power and low-power design, a, b, c three-phase current of any one phase current up to 10% of the rated current, the device that is able to work properly, and provide tripping power to the circuit breaker, which greatly simplifies the design of High Volt
  • 匿名
2013-05-23 12:23:18
Units are current transformer, electrical technology and low-power design, when A , B C , 3-phase current in any of the phase current rated current of the device is 10 percent, and that will work, and is a circuit breaker tripped power supply provided, which can significantly simplify the high volta
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
Device used for current transformer takes technology and low-power design, when any of a, b, c three-phase current 10% for a rated current of current reach, equipment is able to work properly and provide tripping power supply circuit breaker, which greatly simplifies the design of the secondary circ
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭