当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:这是因为随着通道级数的增加,使得微通道内部的流体更加的分布均匀,全场的温度梯度越来越小,最终减小了截面的最高温度。在相同的通道对流换热面积下,通道的宽度随着分叉级数的增加而减小,这引起了通道起始段流体对温度场的影响减小,所以截面最高温度的下降越来越缓慢。下面我们就通道级数对于通道截面压力的影响进行分析,分析见下图是什么意思?

待解决 悬赏分:1 - 离问题结束还有
这是因为随着通道级数的增加,使得微通道内部的流体更加的分布均匀,全场的温度梯度越来越小,最终减小了截面的最高温度。在相同的通道对流换热面积下,通道的宽度随着分叉级数的增加而减小,这引起了通道起始段流体对温度场的影响减小,所以截面最高温度的下降越来越缓慢。下面我们就通道级数对于通道截面压力的影响进行分析,分析见下图
问题补充:

  • 匿名
2013-05-23 12:21:38
This is because with the increase of the channel series, making the fluid within the microchannel more uniform distribution of the temperature gradient of the audience is getting smaller and smaller, and ultimately reduces the cross section of the maximum temperature. In the same channel convective
  • 匿名
2013-05-23 12:23:18
正在翻译,请等待...
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
This is because with the increased channel series, making Micro-Channel flow more evenly within the, the audience getting smaller and smaller temperature gradient, ultimately reducing the maximum temperature of the section. Convective heat transfer area in the same channel, channel width of fork pro
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭