当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:HIGH WATER ALARM SWITCH The high water alarm uses the same switch as the Mid Bilge pump. Please also be advised that the switch is only in the mid compartment. Other compartments could flood first and the switch would not be activated. The switch will only be activated when the normal operating bilge pumps have failed 是什么意思?

待解决 悬赏分:1 - 离问题结束还有
HIGH WATER ALARM SWITCH The high water alarm uses the same switch as the Mid Bilge pump. Please also be advised that the switch is only in the mid compartment. Other compartments could flood first and the switch would not be activated. The switch will only be activated when the normal operating bilge pumps have failed
问题补充:

  • 匿名
2013-05-23 12:21:38
高水位报警器高水位报警切换使用中的舱底泵在同一台交换机。请也表示开关是只在中间的车厢。其他车厢可能淹没首先,开关不会被激活。交换机只将被激活,舱底泵的正常运行时失败,并不能处理的来水流量
  • 匿名
2013-05-23 12:23:18
高水位报警开关的高水报警使用同一个交换器中的舱底泵。 另外请告知,该开关只在中间仓。 其他隔离专区可以泛光第一个和交换机将会不被激活。 该交换机仅当激活正常操作舱底泵发生故障且无法处理传入水量
  • 匿名
2013-05-23 12:24:58
水位高警报开关水位高警报使用开关和中间喷射器一样。 也请被劝告开关仅在中间隔间。 其他隔间可能首先充斥,并且不会激活开关。 开关,当正常经营的喷射器发生了故障并且不可能处理接踵而来的水流量,只将激活
  • 匿名
2013-05-23 12:26:38
高水报警开关高水位警报器使用同一开关作为中期舱底泵。请还注意交换机是只在中期的车厢内。其他车厢可以第一次洪水和交换机不会被激活。正常操作舱底泵已经失败,无法处理传入的水流动时才会激活交换机
  • 匿名
2013-05-23 12:28:18
高水位的警示使用的高水%
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭