求翻译：将跑轨以中心柱为圆心按照跑轨上标号顺时针均匀摆开，然后将其用螺栓连接固定，跑轨上带有穿线孔的一侧靠近电源控制柜方向，跑道表面必须平整。是什么意思？

Will run the rail to the center column to the center of the circle evenly laid out in accordance with the running rail on the label clockwise, and then fixed with bolts, with a threaded hole on one side of the running rail near the direction of the power control cabinet, the runway surface must be s

The center post to run rails for the Center in accordance with running rails on evenly numbered in a clockwise direction, then it will be used bolt mounting, and ran on rails with a threaded hole in the side direction close to the power control cabinet, the runway surface must be flat.

Will run the axle as the center of circle according to runs on the axle take the center pole the marking clockwise to exhibit evenly, then will be fixed it with the bold fastening, runs on the axle to have threading hole one side to approach the power source control cubicle direction, the runway sur

Running Rails to center column as the Centre in accordance with label clockwise uniform were arrayed on the running track, and then bolted it fixed, running rail with stringing holes on one side near the power control cabinet, must be formed on the surface of the runway.

正在翻译，请等待...