当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:通过检测变频器的母线电压,并与该功能码的设置值进行比较,当实际母线电压超过该值时,变频器将暂停减速, 直到母线电压降低到比该设定值还小5.0%时, 再继续减速。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
通过检测变频器的母线电压,并与该功能码的设置值进行比较,当实际母线电压超过该值时,变频器将暂停减速, 直到母线电压降低到比该设定值还小5.0%时, 再继续减速。
问题补充:

  • 匿名
2013-05-23 12:21:38
Through the detection of the inverter bus voltage, and set the value of the function code when the actual bus voltage exceeds the value, the drive will pause to decelerate until the bus voltage down to 5.0% smaller than the set value. and then continue to slow down.
  • 匿名
2013-05-23 12:23:18
By detecting the bus voltage converter, and the feature code value of the setting, when the actual bus voltage is more than the value, the drive will be suspended until it slows down, bus voltage lower than the set value is also a 5.0 per cent, to continue to slow down.
  • 匿名
2013-05-23 12:24:58
Through examines the frequency changer the generatrix voltage, and carries on the comparison with this functional code establishment value, when the actual generatrix voltage surpasses this value, the frequency changer will suspend decelerates, when until generatrix stepping down of voltage to compa
  • 匿名
2013-05-23 12:26:38
By detecting the bus voltage of the inverter, and compare with the setting of the function code, when the actual bus voltage exceeds the value, the inverter will pause to slow down, until the bus voltage is reduced to smaller than the setting value 5%, then continued to slow down.
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭