求翻译：1)无点偏、点穿、虚焊、翘角、掉粉。焊接强度合格标准：极耳、极片之间扯开后，应有一侧基体残留另一侧极片或极耳上，粘附面积约等于焊点面积是什么意思？

1) point of partial point wear Weld, Qiaojiao, the powder out. Welding strength eligibility criteria: the pole, after the tear between the pole piece, should be the side of the substrate residues other side of the pole piece or a very ear, the adhesion area is about equal to the solder joint area

1) No Point Offset, wear, and the solder points, cocked, and the toner. Eligibility criteria: welding strength very ear, between the pole pieces, there should be a side-product residue on one side or a chip on his ears, and a very sticky area approximately equal to weld area

1) does not have, exposes, the faulty soldered joint, the rake, falls the powder.Strength of a weld qualified standard: Between the ear, the pole piece tears after extremely, should have one side substrate to remain another one side pole piece or extremely on the ear, the adherency area is equal to

1) points, point out and deficiency-free welding, cutting corners, off the powder. Qualified welding strength standards: between the ears, after screeching, there should be one side residue substrate on the other side of the plate, or ear, glued area about solder joint area

正在翻译，请等待...