|
关注：1
2013-05-23 12:21
求翻译：检查过程中发现两台减速器的中间轴的表面粗糙度过大，远远大于我们所要求的。我们技术要求是表面粗糙度不大于6是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
检查过程中发现两台减速器的中间轴的表面粗糙度过大，远远大于我们所要求的。我们技术要求是表面粗糙度不大于6
问题补充： |
|
2013-05-23 12:21:38
Two intermediate shaft gear surface roughness is too large, far greater than we are asking for the inspection process. Our technical requirements for the surface roughness of not more than 6
|
|
2013-05-23 12:23:18
Check-in process was found in two drives in the middle of the shaft through the rough surface, far more than we want. We are the technical requirements surface roughness is not greater than 6
|
|
2013-05-23 12:24:58
In the inspection process discovered two reduction gears intermediate shaft surface roughness oversized, is bigger than us to request by far.Our specification is the surface roughness is not bigger than 6
|
|
2013-05-23 12:26:38
Found during the inspection of surface roughness through two intermediate shaft of reducer, is much larger than we require. Our technical requirements for surface roughness is less than 6
|
|
2013-05-23 12:28:18
check discovered in the course of the two drives of the intermediate shaft too large surface roughness, far more than we want. We are the technical requirements surface roughness is not greater than 6
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
