求翻译：一路从CCP1引脚输出的PWM 信号控制V1和V4的开关管IRF504N导通或截止；另一路的PWM 信号经过反相器7406芯片，产生两路驱动信号控制V2和V3的开关管IRF504N导通或截止；V1，V4与V2，V3 是互补的两路控制信号。是什么意思？

All the way from the CCP1 pin output of the PWM signal V1 and V4 of the switch IRF504N turned on and off; another way the PWM signal through inverter 7406 chip, resulting in two-enable signal, V2 and V3 of the switch is turned on or IRF504N cut-off; V1, V4 and V2, V3 are two complementary control si

The road from CCP 1 -pin output of signal control V PWM V 4 1 And the switch control 504 IRF N misleading links or the deadline; another road PWM signal after anti-sang is the 7406 chip, and produce two road drive signal control V V 2 and 3 of the switch control 504 IRF N conduction or deadline; V V

A group from CCP1 pin output PWM signal control V1 and V4 switching valve IRF504N breakover or closure; Another group PWM signal after the phase reverser 7406 chips, produces two group driving signals to control V2 and the V3 switching valve IRF504N breakover or the closure; V1, V4 and V2, V3 are th

CCP1 pin PWM signal output control switch tube IRF504N conduction of V1 and V4 or due; others all the way through inverter PWM signal 7,406 chip, driving two road signal control switch tube IRF504N conduction of the V2 and V3 or due; V1,V4 and V2,V3 are complementary to both control signals.

Control V1 and switch of V4 in charge of IRF504N lead from CCP1 PWM signal that pin output put through or end all the way; PWM signal all the way pass against looks device 7406 chip another, produce drive signal control V2 and switch of V3 in charge of IRF504N lead put through or end by two No.; V1,