|
关注：1
2013-05-23 12:21
求翻译：焊接FUSE的時間為1-2S并盡可能一次性焊接好,對未一次焊接好的FUSE需等到FUSE冷卻后再進行焊錫,避免連續焊錫造成FUSE合金受損.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
焊接FUSE的時間為1-2S并盡可能一次性焊接好,對未一次焊接好的FUSE需等到FUSE冷卻后再進行焊錫,避免連續焊錫造成FUSE合金受損.
问题补充： |
|
2013-05-23 12:21:38
FUSE welding time for one-time 1-2S and welding as well, to not need to wait until a welded FUSE FUSE cool before soldering, to avoid the continuous solder alloy damage caused by FUSE.
|
|
2013-05-23 12:23:18
Welding FUSE the time of 1-2 S 并 as much as possible time welding, not a welding good FUSE FUSE cooling 后 to wait longer for solder, avoid continuous solder caused FUSE alloy damaged.
|
|
2013-05-23 12:24:58
Welds FUSE the time is 1-2S and disposable welds as far as possible, when after FUSE which one time has not welded needs FUSE to cool carries on the soldering tin again, avoids the continual soldering tin creating the FUSE alloy damage.
|
|
2013-05-23 12:26:38
Welding FUSE times are 1-2S and possibly one-off welding well, is not a good welding cooling before you solder FUSE until the FUSE, avoid damaged FUSE alloy solder in a row.
|
|
2013-05-23 12:28:18
間 1-2S and 盡 to weld FUSE may lump-sum welding well, weld good FUSE need wait until FUSE has been cold competent to weld 錫進 at one time, prevent 連續 from welding 錫 to cause FUSE alloy to receive.
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
