|
关注：1
2013-05-23 12:21
求翻译：①车两端面，控制总长度为200mm，两端钻B型中心孔。②粗车外圆，各部分预留量为2~3mm。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
①车两端面，控制总长度为200mm，两端钻B型中心孔。②粗车外圆，各部分预留量为2~3mm。
问题补充： |
|
2013-05-23 12:21:38
① car at both ends of the surface, to control the total length of 200mm, both ends of the drill hole B-type centers. ② Rough cylindrical, each part of the reserve capacity of 2 ~ 3mm.
|
|
2013-05-23 12:23:18
1 car for two face to control total length 200 mm, the two end holes drilled B Center in transition. 2 The outer circle, rough car reserved for the Part 2 ~ 3mm .
|
|
2013-05-23 12:24:58
①The vehicle two end surfaces, the control total length is 200mm, the both sides drills the B center bore.②The roughing outer annulus, various part of reservation quantity is 2~3mm.
|
|
2013-05-23 12:26:38
① car at each end, control the total length of 200mm, drill-b center hole on both ends. ② for rough turning of outer circle, reserved sections of 2~3mm.
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
