求翻译：用调节螺钉粗调绞缆机的工作位置，打开轴承盖，用塞尺检查绞缆机轴承间隙，使同一台绞缆机的左右两轴承的径向间隙均匀，并符合设备对间隙的要求。是什么意思？

Uniform radial clearance of the bearing about the same winch to adjust the position of the screw coarse winch to open the bearing caps, cable cutter bearing clearance with a feeler, and in accordance with the requirements of the equipment gap.

With the adjusting screw coarse twisted pair cable is the work location, open bearing cover, with the twisted cable gauge to check the bearing clearance, so that a single twisted pair cable is the right and left of the bearing radial clearance, and evenly with the device of the clearance requirement

With the adjusting screw coarse adjustment warping winch working position, opens the bearing cap, with the feeler gauge inspection warping winch bearing gap, causes the identical Taiwan warping winch about two bearing radial clearances to be even, and conforms to the equipment to the gap request.

Rough mooring winch with the adjusting screws, open the bearing cover, check mooring winch bearings with clearance gauge clearance, around the same mooring winch two uniform radial clearance of bearings, and meet the equipment requirements for clearance.

The plate entangles into a cable machine