求翻译：基座定位焊位置应根据不同基座做合理安排，定位焊缝长度应不小于30mm，定位焊后应复验绞缆机位置、高低水平尺寸，确保无误，吊离绞缆机，并严格按焊接工艺要求焊接。是什么意思？

Base tack welding position to make reasonable arrangements should be based on a different base, positioning the weld length should be not less than 30mm, tack welding should reinspect the location of the cable cutter high and low levels of size, to ensure correct, hanging from the winch, and strictl

Base of the welding position should be positioned according to the different base reasonable arrangements, positioning weld length should be not less than 30 mm after welding, the registration should be twisted pair cable Check the location, high and low level size and make sure it is correct, lifte

The base positioned weld position should act according to the different base to make the reasonable arrangement, locates the welded joint length to be supposed not to be smaller than 30mm, after the positioned weld should the re-check warping winch position, the height horizontal size, guarantees un

Base position welding position should be based on different bases make reasonable arrangements, positioning seam length should be not less than 30mm, positioned after welding should be re-inspection of mooring winch, high and low, ensure that the correct, hanging out warping machine, and strictly ac

The plate entangles into a cable machine