|
关注:1
2013-05-23 12:21
求翻译:The results show that adding a wiper die to the base die set decreases the radial, hoop, and tangential compressive stress and the tangential compressive strain, and adding a mandrel to the base die set also decreases these stresses, but increases the radial and hoop tensile stress and decreases the hoop compressive st是什么意思? 待解决
悬赏分:1
- 离问题结束还有
The results show that adding a wiper die to the base die set decreases the radial, hoop, and tangential compressive stress and the tangential compressive strain, and adding a mandrel to the base die set also decreases these stresses, but increases the radial and hoop tensile stress and decreases the hoop compressive st
问题补充: |
|
2013-05-23 12:21:38
结果表明,添加雨刮死基芯片集减少的径向,环向,切向压应力和切向压应变,并添加一个的芯棒到死设置也降低了这些压力的基础,但增加的径向和环向拉伸压力和降低箍压应变明显,并带来了约一个三维的拉伸应力集中芯棒提供支持。中等强度TA18管数控弯曲,断面的扁平化是更敏感指数比壁厚变薄。引入芯棒可以提高截面明显平坦,但它有一点点差壁厚变薄,中心抽头死基芯片集可以抑制内隆起的发生,但恶化的跨扁平化的影响部分显着。考虑上述影响弯曲性能上的雨刮器芯轴和模具,它是合理的,适用的芯片组包括一个弯曲模,钳死了,压力小直径模设置,包括适当加管芯棒管
|
|
2013-05-23 12:23:18
|
|
2013-05-23 12:24:58
|
|
2013-05-23 12:26:38
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区