求翻译：主要修改了壁厚及脱模斜度，产品壁厚从3.5MM增加到4MM,所以产品重量从950克增加大1080克,增加了130克.(因为ADC6铝合金压铸流动性比较差,所以要把产品的壁厚加大,脱模斜度也要增加)是什么意思？

The main changes of wall thickness and Demoulding product wall thickness from 3.5mm to 4mm, product weight increase from 950 g 1080 g, 130 g (adc6 aluminum alloy die-casting fluidity is relatively poor, so The wall thickness of the product should increase, the Demoulding should increase)

The main change wall thickness and mold thickness gradient, products from 3.5 to 4 MM MM increased from 950 grams weight products, thus increasing the 1080 grams, 130 grams has increased (because ADC . 6 aluminum alloy die-casting mobility products are relatively poor, I have had to increase the wal

Mainly revised wall thickness and the drawing of patterns ascent, product wall thickness increases from 3.5MM to 4MM, therefore the product weight increases the great 1080 grams from 950 grams, increased 130 grams. (Because ADC6 aluminum alloy compression casting fluidity quite is bad, therefore mus

Mainly modified the thickness and inclination of stripping, increased wall thickness from 3.5MM to 4MM, product weight increased from 950 g 1080 g, an increase of 130 grams. (ADC6 aluminum die-cast flow relatively poor, so increased wall thickness of product, release angle to increase)