求翻译：更换手具后，在加入冷却水时应时刻注意光头与主机连接处是否有水渗出，如有水渗出应将冷却水放掉，拔下手具，将手具与主机连接处擦干后再重新装好，重新加入去离子水。是什么意思？

After replacement of hand tools, before joining the cooling water should always pay attention to whether the junction with the host head of water leakage, water leakage if the cooling water should be let go, unplug the hand tools, hand tools will be dry after the junction with the host re-installed

Join Hands in a replacement after cooling water should pay attention to the point the skinheads and connectivity to the host computer, such as whether there is a water oozing from a water cooling water seeping should be discarded, and lay a hand has and will connect to the host after the re-installe

After the replacement has, when joins the cooling water should the time attention baldly with the main engine attachment point whether has the water to seep out, if has the water to seep out should bleed off the cooling water, pulls out starts to have, has the hand after the main engine attachment p

After changing hands, joining the cooling water should keep an eye on bald with a host connection whether there is water leaking, oozing with water cooling water should be let out, pull start, connected to the host will hand wipe and reinstall again, rejoining the deionized water.

Change hand have, while adding the cooling water should notice the bareheaded junction with host computer have ink that is oozed out constantly, have water ooze out should let off cooling water, pull out start have, have junction with host computer assemble hand again dry, add the deionized water ag