|
关注：1
2013-05-23 12:21
求翻译：启动过程中乳状液受压后，在开始的几秒钟里，剪切应力随时间迅速增大，在10 s时剪切应力达到最大值 15 Pa，然后剪切应力迅速减小是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
启动过程中乳状液受压后，在开始的几秒钟里，剪切应力随时间迅速增大，在10 s时剪切应力达到最大值 15 Pa，然后剪切应力迅速减小
问题补充： |
|
2013-05-23 12:21:38
Start the process of emulsion under pressure after a few seconds at the beginning, the shear stress increases rapidly with time, in the 10 s when the shear stress reaches its maximum value 15 Pa, the shear stress decreases rapidly and then
|
|
2013-05-23 12:23:18
Restart the emulsions, at the beginning of pressure after a few seconds, rapidly increasing over time, shear stress, shear stress in 10 s when reaching the maximum value, and then shear stress Pa 15 rapid reduction
|
|
2013-05-23 12:24:58
In after the start process the emulsion bearing, in several seconds which starts, the shear stress increases rapidly along with the time, when 10 s shear stress maximizing 15 Pa, then the shear stress reduces rapidly
|
|
2013-05-23 12:26:38
Emulsion during the boot process after compression, in the first few seconds, shear stress in rapidly increasing over time, maximum shear stress at 10 s 15 Pa and shear stress in rapidly decreasing
|
|
2013-05-23 12:28:18
In the start-up process after the emulsion is pressed, during several seconds beginning, the shearing stress increases with time rapidly, the shearing stress achieves maximum 15 Pa when 10 s, then the shearing stress is reduced rapidly
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
