当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:本设计是一个低压,低功耗LC谐振放大器;为了便于测试,在放大器的输入端插入一固定衰减器。衰减器由π型电阻网络组成,实现衰减40DB即100倍的功能,其中特性阻抗为50欧姆。放大器电路是由三级放大构成,主要应用9018三极管,两级共射级放大,以及一级LC谐振放大器构成,增益在60DB,带宽在300KHZ左右,输入电阻50欧姆;当负载电阻为200欧姆,输出电压1V,波形无明显失真;此放大器使用3.6V稳压电源供电。通过增益控制电路AGC,实现自动增益。整个系统由STM32控制,通过AD所采集值对增益步进控制,液晶显示器显示所设置衰减增益倍数。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
本设计是一个低压,低功耗LC谐振放大器;为了便于测试,在放大器的输入端插入一固定衰减器。衰减器由π型电阻网络组成,实现衰减40DB即100倍的功能,其中特性阻抗为50欧姆。放大器电路是由三级放大构成,主要应用9018三极管,两级共射级放大,以及一级LC谐振放大器构成,增益在60DB,带宽在300KHZ左右,输入电阻50欧姆;当负载电阻为200欧姆,输出电压1V,波形无明显失真;此放大器使用3.6V稳压电源供电。通过增益控制电路AGC,实现自动增益。整个系统由STM32控制,通过AD所采集值对增益步进控制,液晶显示器显示所设置衰减增益倍数。
问题补充:

  • 匿名
2013-05-23 12:21:38
正在翻译,请等待...
  • 匿名
2013-05-23 12:23:18
正在翻译,请等待...
  • 匿名
2013-05-23 12:24:58
This design is a low pressure, low power loss LC tuned amplifier; For ease of the test, inserts a fixed attenuator in the amplifier input end.The attentuator is composed by pi the resistance network, the realization weakens the 40DB namely 100 time of functions, in which characteristic impedance is
  • 匿名
2013-05-23 12:26:38
This design was a low-voltage, low power amplifier LC resonance; for ease of testing, at the amplifier input insert fixed attenuator. Attenuator is made up of PI-type resistor networks and achieve 40DB of attenuation is 100 times times features, of which the characteristic impedance is 50 ohms. Ampl
  • 匿名
2013-05-23 12:28:18
This design was a low-voltage, low power amplifier LC resonance; for ease of testing, at the amplifier input insert fixed attenuator. Attenuator is made up of PI-type resistor networks and achieve 40DB of attenuation is 100 times times features, of which the characteristic impedance is 50 ohms. Ampl
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭