当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:sets the maximum time the detector is in CIP-mode (in minutes). After this time, the detector will switch to normal operation even if CIP input remains HIGH. Next CIP can be activated only after CIP input has been reset to low.是什么意思?

待解决 悬赏分:1 - 离问题结束还有
sets the maximum time the detector is in CIP-mode (in minutes). After this time, the detector will switch to normal operation even if CIP input remains HIGH. Next CIP can be activated only after CIP input has been reset to low.
问题补充:

  • 匿名
2013-05-23 12:21:38
正在翻译,请等待...
  • 匿名
2013-05-23 12:23:18
套时间最长的探测器是在CIP-mode(以分钟计)。 在这段时间里,探测器将改以正常运作即使CIP投入仍然很高。 下一个CIP可以启动后只CIP投入已复位为低。
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
设置探测器是 CIP 模式 (以分钟计) 的最长时间。经过这一次,探测器将切换到正常运行即使 CIP 输入仍高。下一步 CIP CIP 输入已到低重置后,才可以激活。
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭