当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:压气站所需止回阀选用无冲击、压降小、流通能力大、密封性能好的止回阀。安装在压缩机出口端的止回阀应能满足压缩机出口温度较高的要求,大口径止回阀应为焊接端口,并能适用于埋地安装。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
压气站所需止回阀选用无冲击、压降小、流通能力大、密封性能好的止回阀。安装在压缩机出口端的止回阀应能满足压缩机出口温度较高的要求,大口径止回阀应为焊接端口,并能适用于埋地安装。
问题补充:

  • 匿名
2013-05-23 12:21:38
正在翻译,请等待...
  • 匿名
2013-05-23 12:23:18
Compressed gas station the required non-return valve choose No shocks, pressure reduction small, circulation capacity, sealing performance good non-return valve. Install the compressor export port of non-return valve compressor outlet temperature should be able to meet the demands for a higher calib
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
Compressor stations needed check valve selection of no impact, smaller pressure drop, large flow capacity, good sealing performance of check valves. Installed on the compressor outlet check valve should be able to meet the requirements for high compressor exit temperature, maintenance of large diame
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭