求翻译：从示波输入端口接入被测信号，观看LCD显示屏幕（一般情况下，探头衰减开关应在X10；系统设置为10：1），如出现被测波形，可以按压F1键（自动）使波形稳定下来。是什么意思？

正在翻译，请等待...

From the input port access detected signals and watch LCD display screen (under normal circumstances, should the probe attenuation switch X; system set to 10 10: 1) the detection, such as the case may be squeezing waveforms F 1 type (automatic) Enable waveform stabilized.

From shows wave input port turning on to measure the signal, watches the LCD screen (in the ordinary circumstances, the probe head weakens the switch to be supposed in X10; The system establishment is 10:1), if appears is measured the profile, may hold back the F1 key (automatically) to cause wavesh

From wave input port access as shown in the measured signal, watch the LCD display screen (under normal circumstances, should probe attenuation in X10; system is set to 10:1), as a result of the measured waveform, you can press the F1 key (auto) waveform stabilized.

正在翻译，请等待...