|
关注：1
2013-05-23 12:21
求翻译：2. 取一张胶片，用工艺检验用标准阶梯试块进行透照，然后将已曝光的胶片（供应商已提供）切成7-8条。取其中一条在标准条件下进行暗室处理。将测得的密度值（选择曝光参数时，应保证其密度值达到2.0±0.30）作为基准密度值。将其余几条已曝光胶片装入暗盒妥善保存备用。（注：此控制胶片必须存在一黑度范围为2.0-2.5的值。）是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
2. 取一张胶片，用工艺检验用标准阶梯试块进行透照，然后将已曝光的胶片（供应商已提供）切成7-8条。取其中一条在标准条件下进行暗室处理。将测得的密度值（选择曝光参数时，应保证其密度值达到2.0±0.30）作为基准密度值。将其余几条已曝光胶片装入暗盒妥善保存备用。（注：此控制胶片必须存在一黑度范围为2.0-2.5的值。）
问题补充： |
|
2013-05-23 12:21:38
正在翻译，请等待...
|
|
2013-05-23 12:23:18
. * 2 from a film, using craft test Test piece in a standard ladder to go through, and then will have been exposed as the film (suppliers) has provided all into 7 - 8. One of them under standard conditions for darkroom processing. The density value will be detected when parameters (select exposure s
|
|
2013-05-23 12:24:58
正在翻译，请等待...
|
|
2013-05-23 12:26:38
2. take a piece of film, process for testing transmission using the standard step test block, and then the exposure film (vendor provided) cut into 7-8. Take one of the standard conditions for darkroom processing. The measured density values (when choosing exposure parameters, should ensure that its
|
|
2013-05-23 12:28:18
2. take a piece of film, process for testing transmission using the standard step test block, and then the exposure film (vendor provided) cut into 7-8. Take one of the standard conditions for darkroom processing. The measured density values (when choosing exposure parameters, should ensure that its
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
