|
关注:1
2013-05-23 12:21
求翻译:考察了微滤预处理、操作压力、温度及体积浓缩比对膜通量的影响,确定的最佳超滤工艺为:压力0.10 MPa,温度50℃,体积浓缩比8是什么意思? 待解决
悬赏分:1
- 离问题结束还有
考察了微滤预处理、操作压力、温度及体积浓缩比对膜通量的影响,确定的最佳超滤工艺为:压力0.10 MPa,温度50℃,体积浓缩比8
问题补充: |
|
2013-05-23 12:21:38
Investigated microfiltration pretreatment, operating pressure, temperature and volume concentration ratio on the membrane flux, to determine the optimal ultrafiltration process as follows: pressure 0.10 MPa, temperature 50 ℃, the volume concentration ratio 8
|
|
2013-05-23 12:23:18
inspected the micro-filtration pre-processing, operating pressure, temperature, and volume than the membrane flux enrichment, determine the impact the best ultra-filtration process for 0.10 MPa: pressure, temperature and the size is 50 °C enrichment than 8
|
|
2013-05-23 12:24:58
Inspected micro has filtered the pretreatment, the service pressure, the temperature and the volume concentration compared to the membrane flux influence, determined best ultra filters the craft is: Pressure 0.10 MPa, the temperature 50℃, the volume concentration compares 8
|
|
2013-05-23 12:26:38
Inspected a microfiltration pretreatment, operating pressure, temperature and volume concentration ratio effect on flux, determining the best ultra-filtration technology for: pressure 0.10 MPa, temperature is 50 ° c, the volume is concentrated more than 8
|
|
2013-05-23 12:28:18
Investigated microfiltration pretreatment, operating pressure, temperature and volume concentration ratio on the membrane flux, to determine the optimal ultrafiltration process as follows: pressure 0.10 MPa, temperature 50 ℃, the volume concentration ratio 8
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区