求翻译：如发现“夹碳”，应在“夹碳”边缘5～10mm重新起刨，深度要比夹碳处深2～3mm，贴渣可用砂轮打磨。露天作业时应在上风口操作，在封闭环境操作，要有通风措施。其工艺参数见下表。是什么意思？

Found "folder carbon" should be in the "folder carbon" 5 ~ 10mm back from the edge plane, the depth of carbon at depth than the clip 2 ~ 3mm, paste residue can be used grinding wheel. Open-air outlet on the job should be in operation, operating in a closed environment, there must be ventilation. The

If found that "Carbon" folder in the folder, and should be marginalized 5 ~ 10 mm carbon " shaver, re-starting folder depth than carbon, 2 ~ 3 mm deep, posted 333 Java available wheel grinding. Open-air operations, should be in operation in a closed environment scavenge operations, must have ventila

If discovered “clamps the carbon”, should in “clamp the carbon” edge 5~10mm to get up digs, the depth must compared to clamp carbon place deep 2~3mm, pastes the dregs available grinding wheel polish.When open-air work should in the uptake operation, in the seal environment operation, have to have th

If found "folder carbon" should be "folder carbon" edges 5~10MM restart plane, depth than carbon deep 2~3mm clip, paste residue available grinding wheels and grinding. When you open a job to be supposed in on air operations, in a closed environment operations, ventilation. Process parameters are sho

Found "folder carbon" should be in the "folder carbon" 5 ~ 10mm back from the edge plane, the depth of carbon at depth than the clip 2 ~ 3mm, paste residue can be used grinding wheel. Open-air outlet on the job should be in operation, operating in a closed environment, there must be ventilation. The