当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:管材纵向焊缝应摆放在上方左右45°方向,相邻两管之间纵向焊缝应错开不小于300mm。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
管材纵向焊缝应摆放在上方左右45°方向,相邻两管之间纵向焊缝应错开不小于300mm。
问题补充:

  • 匿名
2013-05-23 12:21:38
Longitudinal weld pipe should be placed in the top left and right 45 ° direction, between adjacent two longitudinal welds shall be staggered not less than 300mm.
  • 匿名
2013-05-23 12:23:18
tubing should be placed in the vertical welds around the 45 degrees direction vertical welds, between two neighboring tube should be not less than 300 mm stagger.
  • 匿名
2013-05-23 12:24:58
The tubing longitudinal welded joint should place in the place above about 45° direction, the neighboring two between longitudinal welded joints should stagger are not smaller than 300mm.
  • 匿名
2013-05-23 12:26:38
Longitudinal weld pipe should be placed at the top left and right 45 ° direction, adjacent longitudinal welds should be staggered between two tubes of not less than 300mm.
  • 匿名
2013-05-23 12:28:18
Longitudinal weld pipe should be placed in the top left and right 45 ° direction, between adjacent two longitudinal welds shall be staggered not less than 300mm.
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭