|
关注：1
2013-05-23 12:21
求翻译：对口时管材纵向焊缝应摆放在上方左右45°方向，相邻两管之间纵向焊缝应错开不小于300mm。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
对口时管材纵向焊缝应摆放在上方左右45°方向，相邻两管之间纵向焊缝应错开不小于300mm。
问题补充： |
|
2013-05-23 12:21:38
Counterparts when the pipe should be placed in the top of the vertical seam of about 45 ° direction, between adjacent two longitudinal welds shall be staggered not less than 300mm.
|
|
2013-05-23 12:23:18
When counterparts tubing vertical welds around should be placed at the side, two neighboring tube 45 degrees direction vertical welds between should be not less than 300 mm stagger.
|
|
2013-05-23 12:24:58
The suitable time tubing longitudinal welded joint should place in the place above about 45° direction, the neighboring two between longitudinal welded joints should stagger are not smaller than 300mm.
|
|
2013-05-23 12:26:38
When counterpart tube longitudinal seam should be placed at the top left and right 45 ° direction, adjacent longitudinal welds should be staggered between two tubes of not less than 300mm.
|
|
2013-05-23 12:28:18
Counterparts when the pipe should be placed in the top of the vertical seam of about 45 ° direction, between adjacent two longitudinal welds shall be staggered not less than 300mm.
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
